Description Compact and robust this single universe Ethernet DMX512 node suits a wide range of applications. With power supplied via a USB socket m...

Description An OEM Board for direct sACN/E1.31 and Art-Net to RGB pixel strip/array control. No longer do you need sACN/Art-Net -> DMX512 ->...

Description Compact OEM Board for sACN/E1.31 and Art-Net to DMX512 conversion. Supporting both DMX512 output and input individually configurable o...

Description Rugged 4 port DMX512 node. Fully protected and isolated DMX512 IN/OUT independently configurable ports with advanced stream merging and...

Description Looking for an affordable USB DMX "cable" that'll go the distance and produce reliable DMX512 data output? The ultraDMX MAX is exactl...

Description An OEM Board for direct sACN/E1.31 and Art-Net to RGB pixel strip/array control. No longer do you need sACN/Art-Net -> DMX512 ->...

Description Perfect middle ground when you need more than 1 universe but without the expense and bulk of 4 universe nodes. We've incorporated both ...

Approved and tested microSD card for DMXking recording/playback. 32GB. Comes with SD adapter. May be replaced this with any compatible/approved bra...

Description: Ideal for powering the eDMX1 when other USB power sources are not readily available. Place your eDMX1 up to 70m / 210feet away (networ...

Description: Use this PoE injector with our eDMX1 PoE, eDMX2 and eDMX4 products. Connect the network connection to IN (i.e. from your router/switch...

Description Compact OEM Board for sACN/E1.31 and Art-Net to DMX512 conversion. Supporting both DMX512 output and input individually configurable o...

Description: Adapter between 3pin female and 5pin male (bi-directional)

Description: 120 ohm terminator for DMX. Available with either 3 or 5-pin connector. Provides for error-free transmission of DMX signals.

Description: Adapter between 3pin male and 5pin female (bi-directional)

Description Compact OEM Board for sACN/E1.31 and Art-Net to DMX512 conversion with external show trigger inputs. Built-in show recording for stand...

Description Rugged 8 port DMX512 node. Fully protected and isolated DMX512 IN/OUT independently configurable ports with advanced stream merging and...

Description: The DV-S4 "Sprite" is a hard working 4K video repeater proving that good things do sometimes come in small packages. Weighing in at ab...

Description Designed for DIN rail cabinet installations in tough electrical environments. eDMX4 PRO ISODIN provides ANSI E1.11 Higher Protection L...

Description: Professional-grade cable, 10 feet (3 meters), with a nominal impedance of 110-120 ohms. Available with either 3 and 5 pin connectors, ...

The MedeaWiz® Hydra™ is an Input and Output expander for the MedeaWiz® Sprite® HD video player.  It adds multiple trigger inputs and outputs, a mot...

Description: Rackmount your eDMX4 MAX products in a standard 19" rack.

Standalone 4.3" touchscreen lighting controller The DMX Core 100 lighting controller in a compact 4.3-inch touchscreen. Powers over Ethernet (or 8–...

Description: Gender changer/adapter between 3pin male and 3pin male (bi-directional)

Description: Active PoE adapter 802.3af/at for 10/100/1000 Mb networks. Perfect to power eDMX4-DIN and other low-power devices. Output Power: 12V ...

Raspberry Pi Pico based controller with two fully isolated DMX512 ports. Write your own firmware and drop it onto the controller when connected to ...

Description: Gender changer/adapter between 3 pin female and 3pin female (bi-directional)

The Key Digital® KD-WP8-3 is an eight-button control keypad. It fits into a single-gang wall box and is PoE-powered. It's easy to program the KD-WP...

Ever needed to re-map DMX channels in an installation? Maybe you don't have access to the original programming and now you got a new light fixture ...

Description: DMX cable, 3 feet (1 meter), nominal impedance of 110-120 ohms, with 3-pin phoenix-style connector at the end to attach to the DMXking...

Super heavy duty...strongest anywhere! Features a superior, custom 6 inch, 5mm diameter, double braided, latex elastic cord Ball is 29mm, made of ...

Great for demos or testing, but can also be used for putting the DMX Core 100 on a desk. It's 3D printed and we have variants with an embedded Ethe...

Universal 12V DC power adapter designed for DMX Core lighting control systems. Delivers stable 2A output at 24W with wide AC input range (100–240V)...

Rack mount option to mount the 4.3" DMX Core 100 in a 19" rack, using standard 3U height. Make sure you sign up to our dedicated mailing list for D...

This is a combination of our professional sound quality audio board, the 2x DMX-512 ports and 4 digital inputs. It connects to the back of the DMX ...

Description: Rackmount your eDMX8 MAX product in a standard 19" rack.

Touchscreen remote for Q-SYS & Symetrix A standalone 4.3" touchscreen controller that runs as a programmable remote for QSC Q-SYS and Symetrix ...