Arista Pro AV Dante Analog Input Adapter let you connect analog line-level products you already own to any Dante-connected system. Bring your mixer...

Arista Pro AV Dante Analog Output Adapter let you drive analog line-level products you already own from any Dante-connected system. Bring your ampl...

Arista Pro AV Dante Analog Output Adapter let you drive analog line-level products you already own from any Dante-connected system. Bring your ampl...

Great for many varieties of items: audio cords, extension cords, tools, Christmas lights, etc Twelve heavy-duty bungee balls included Can support ...

Super heavy duty...strongest anywhere! Features a superior, custom 6 inch, 5mm diameter, double braided, latex elastic cord Ball is 29mm, made of ...

DMXcompander™ makes it possible to run three DMX512 Universes in one CAT-5 cable. A CAT-5 cable has four data-pairs, one pair is used as the 0V ref...

DMXtender™ makes it possible to connect two CAT-5 cables together. The DMXtender™ can be mounted on a DIN rail, lighting rig or a wall etc. The stu...

DMXterminator™120 is a RJ45 connector plug with a 120 Ohm resistor inside connected to the data lines. Plug this in at the last DMX unit and the DM...

DMXterminator™XLR is a XLR connector plug with a 120 Ohm resistor inside connected to the data lines. Plug this in at the last DMX unit and the DMX...

XLRJ45® is an adapter to convert a DMX512 XLR connector to a RJ45 connector. The adapter makes it possible to use any ordinary, low cost CAT-5 ethe...

Introducing the IRIV IO Controller, an industrial-grade IO controller designed for lightweight automation solutions. It is powered by the brand new...

Description: DMX cable, 3 feet (1 meter), nominal impedance of 110-120 ohms, with 3-pin phoenix connector at the end to attach to the DMXking MAX a...

Description: Professional-grade cable, 10 feet (3 meters), with a nominal impedance of 110-120 ohms. Available with either 3 and 5 pin connectors, ...

This is a professional sound quality audio board for the DMX Core 100. Based on the TI TAD5242 DAC you'll get 120dB dynamic range, 192 kHz sampling...

Great for demos or testing, we now offer a 3D printed desk stand where you can mount the DMX Core 100. We also offer the STL file if you prefer to ...

You can now add dual universe DMX-512 ports directly to the DMX Core 100 wall controller. This attaches to the back of the main board and gives you...

This is a standalone wall controller with a 4.3" touchscreen that is mounted in a 2-gang electrical box and powered over Ethernet (or 8-28VDC input...

This is a standalone wall lighting controller with a 4.3" touchscreen that can be mounted in a 2-gang electrical box and powered over Ethernet (or ...

This is a wall controller based on the Raspberry Pi CM4 (not included) with a 4.3" touchscreen that can be mounted in a 2-gang electrical box. This...